626-2RS bearing
The 626-2RS is a miniature ball bearing with a 6 mm bore, 19 mm outside diameter and 6 mm width, rubber sealed on both sides.
Size & specs
| Type | Miniature ball bearing |
|---|---|
| Bore (ID) | 6 mm (0.236 in) |
| Outside diameter (OD) | 19 mm (0.748 in) |
| Width | 6 mm (0.236 in) |
| Seals / shields | 2RS: rubber sealed on both sides |
Cross reference: same bearing, other brands
| SKF | 626-2RSH |
|---|---|
| NTN | 626LLU |
| NSK | 626DDU |
| FAG | 626-2RSR |
| Timken | 626-2RS |
| Koyo | 626-2RS |
Budget brands usually sell this as 626-2RS. Add C3 if your old bearing was stamped C3 (looser fit for hot-running motors).
Where to buy
Other versions
Other bearings with a 6 mm bore
Questions
What size is a 626-2RS bearing?
6 × 19 × 6 mm (bore × outside diameter × width).
What does 2RS mean?
2RS means rubber seals on both sides. Seals keep out dirt and water better than metal shields, which makes them a good default for farm, outdoor and wet equipment.
Is 626-2RS the same as 626-2RSH or 626LLU?
Yes. They share the same size and seal type. Brands just use different suffixes: SKF uses 2RSH, NTN uses LLU, NSK uses DDU and FAG uses 2RSR.